↓

3. S/C Signature

Approval for all the items

          ↓

4. Advance

Pay 50% by T/T

          ↓

5. Product Design Checking

We check the product design. If some position is not perfect,
or can not be done on the mould, we will send customer the report.

          ↓                    

6. Mould Design

We make mould design on the basis of confirmed product design, and send to customer for confirmation.

          ↓

7. Mold Tooling

We start to make mold after mold design confirmed

          ↓

8. Mold Processing

Send report to customer once each week

          ↓

9. Mold Testing

Send trial samples and try-out report to customer for confirmation

          ↓

10. Mold Modification

According to customer's feedback

          ↓ 

11. Balance settlement

50% by T/T after the customer approved the trial sample and mould quality.

          ↓ 

12. Delivery

Delivery by sea or air. The forwarder can be designated by your side.

Why choose us?

EURA Advantage:

 EURA can offer you:

1.Good steel with high hardness

2.Good accessories with high brightness

3.Good machining with high precise

4.In-time response on email, telephone calls or fax

5.In-time supply the quotation and mould designs

6.In-time commnication on the technical points

7.In-time sending pictures for the mould machining progress and mould finishing schedule

8.In-time mould test and sample delivery

9.In-time mould delivery 

We make the commitment of service as below:

 1.Lead time: 1-5 working days

 2.Design period: 1-5 working days

 3.Email reply: within 24 hours

 4.Quotation: within 2 working days

 5.Customer complaints: reply within 12 hours

 6.Phone call service: 24H/7D/365D 

 7.Spare parts: 30%, 50%, 100%, according to specific requirement 

 8.Free sample: according to specific requirement

 We guarantee to provide the best and quick mold service for customers!

Packaging & Shipping

EURA Mould Packing and Shipping:

Anti-rust oil is painted first, then plastic film, and finally wooden case.

Sent together with the mould:

a)  Mould manual instruction

b)  Engineering drawing in flash disk

c)  One more set of mould spare parts: heater, ejector pin, bush, water nozzle, water pipe, hanging ring.

What we need for mould quote? 

1) Mould steel raw material you require or mould life your require

2) Mould cavity No. you want

3) 2D or 3D product drawing, or pictures with detailed size information(L*W*H, and thickness), or samples

4) Mould standard

5) Hot runner or cold runner, if hot runner, tell me brand of hot runner you require

6) Raw material of the product

7) Sample quantity and packing 

 For more detailed information, pls feel free to contact us.

We will always be on the other side to serve you!